t0mpr1c3 HG Junior

Joined: 24 Sep 2012 Posts: 11
|
Posted: Mon Dec 17, 2012 3:42 pm Post subject: Stovetop toner transfer tutorial |
|
|
I have posted a tutorial for making PCBs at home. Laser print your image onto cheap magazine paper. Put a hotplate on the stove and heat to 175 °C. Bond the image to the copper clad board by placing them print side down onto the hotplate between two sheets of paper and applying pressure with a rolling pin for a few minutes. For double sided boards, flip every 30 seconds or so.
Link: http://smokedprojects.blogspot.com/2012/12/diy-pcbs-by-toner-transfer.html _________________ Magic Smoke blog |
|