FAQFAQ   GalleryGallery   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in   Forum RSS Feed   Hacked Gadgets Main Site 

Speech Recognition with BitVoicer and Arduino

 
Post new topic   Reply to topic    Hacked Gadgets Forum Index -> Microcontroller Resources
View previous topic :: View next topic  
Author Message
leandro4b
Newbie


Joined: 16 Nov 2012
Posts: 1

PostPosted: Sat Nov 17, 2012 9:16 am    Post subject: Speech Recognition with BitVoicer and Arduino Reply with quote

The main goal of this project was to test the speech recognition performance of BitVoicer (http://www.bitsophia.com/BitVoicer.aspx). For this purpose, I designed a simple led control sketch which I integrated with BitVoicer. Of course you can do anything you want once you have received the commands from Bitvoicer, but to keep things simple, I thought a led test would do just fine.

This is the YouTube video of the test at work.

http://www.youtube.com/watch?v=gs-3fJCa5P0

This is the code I created to control the leds and retrieve data sent from BitVoicer:

Code:

//Includes the BitVoicer library to the sketch
#include <BitVoicer.h>

//Sets up the pins and default variables
int pinR = 3;
int pinY = 5;
int pinG = 6;
int blinkDelay = 250;
int sequenceDir = 0;
int lightLevel = 0;

//Creates a new instance of the BitVoicerSerial class
//Sets up serial port to 0
BitVoicerSerial bitVoicer = BitVoicerSerial(0);

void setup()
{
  //Starts serial communication and sets up the pinModes
  Serial.begin(9600);
  pinMode(pinR, OUTPUT);
  pinMode(pinY, OUTPUT);
  pinMode(pinG, OUTPUT);
}

void loop()
{
  //Retrieves data from serial buffer 
  bitVoicer.getData();
 
  //Quits the loop if no string data was returned from getData
  if (bitVoicer.strData == "")
  {
    return;
  }
 
  //Each of the next 'if' statements performs a different
  //task based on the data received from BitVoicer
  if (bitVoicer.strData == "wake")
  {
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    delay(200);
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    delay(200);
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    delay(200);
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    delay(200);
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    delay(200);
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    bitVoicer.strData = "";
    lightLevel = 0;
  }
  else if (bitVoicer.strData == "sleep")
  {
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    delay(200);
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    delay(200);
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    delay(200);
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    bitVoicer.strData = "";
    lightLevel = 0;
  }
  else if (bitVoicer.strData == "RH")
  {
    digitalWrite(pinR, HIGH);
    bitVoicer.strData = "";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "RL")
  {
    digitalWrite(pinR, LOW);
    bitVoicer.strData = "";
    lightLevel = 0;
  }
  else if (bitVoicer.strData == "YH")
  {
    digitalWrite(pinY, HIGH);
    bitVoicer.strData = "";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "YL")
  {
    digitalWrite(pinY, LOW);
    bitVoicer.strData = "";
    lightLevel = 0;
  }
  else if (bitVoicer.strData == "GH")
  {
    digitalWrite(pinG, HIGH);
    bitVoicer.strData = "";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "GL")
  {
    digitalWrite(pinG, LOW);
    bitVoicer.strData = "";
    lightLevel = 0;
  }
  else if (bitVoicer.strData == "blink")
  {
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    delay(blinkDelay);
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    delay(blinkDelay);
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "BF")
  {
    blinkDelay = 100;
    bitVoicer.strData = "blink";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "BFF")
  {
    switch (blinkDelay)
    {
      case 500:
        blinkDelay = 250;
        break;
      case 250:
        blinkDelay = 100;
        break;
      default:
        break;
    }
    bitVoicer.strData = "blink";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "BS")
  {
    blinkDelay = 500;
    bitVoicer.strData = "blink";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "BSS")
  {
    switch (blinkDelay)
    {
      case 100:
        blinkDelay = 250;
        break;
      case 250:
        blinkDelay = 500;
        break;
      default:
        break;
    }
    bitVoicer.strData = "blink";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "sequence")
  {
    if (sequenceDir == 0)
    {
      digitalWrite(pinR, HIGH);
      delay(250);
      digitalWrite(pinR, LOW);
      digitalWrite(pinY, HIGH);
      delay(250);
      digitalWrite(pinY, LOW);
      digitalWrite(pinG, HIGH);
      delay(250);
      digitalWrite(pinG, LOW);
    }
    else
    {
      digitalWrite(pinG, HIGH);
      delay(250);
      digitalWrite(pinG, LOW);
      digitalWrite(pinY, HIGH);
      delay(250);
      digitalWrite(pinY, LOW);
      digitalWrite(pinR, HIGH);
      delay(250);
      digitalWrite(pinR, LOW);
    }
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "revert")
  {
    if (sequenceDir == 0)
    {
      sequenceDir = 1;
    }
    else
    {
      sequenceDir = 0;
    }
    bitVoicer.strData = "sequence";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "ALLON")
  {
    digitalWrite(pinR, HIGH);
    digitalWrite(pinY, HIGH);
    digitalWrite(pinG, HIGH);
    bitVoicer.strData = "";
    lightLevel = 255;
  }
  else if (bitVoicer.strData == "ALLOFF")
  {
    digitalWrite(pinR, LOW);
    digitalWrite(pinY, LOW);
    digitalWrite(pinG, LOW);
    bitVoicer.strData = "";
    lightLevel = 0;
  }
  else if (bitVoicer.strData == "brighter")
  {
    if (lightLevel < 255)
    {
      lightLevel += 85;
      analogWrite(pinR, lightLevel);
      analogWrite(pinY, lightLevel);
      analogWrite(pinG, lightLevel);
    }
    bitVoicer.strData = "";
  }
  else if (bitVoicer.strData == "darker")
  {
    if (lightLevel > 0)
    {
      lightLevel -= 85;
      analogWrite(pinR, lightLevel);
      analogWrite(pinY, lightLevel);
      analogWrite(pinG, lightLevel);
    }
    bitVoicer.strData = "";
  }
  else
  {
    Serial.println("ERROR:" + bitVoicer.strData);
    bitVoicer.strData = "";
  }
}


It uses the BitVoicer Arduino library that can be downloaded from BitSophia's website (http://www.bitsophia.com).

This is the basic layout of this project. I also added a couple of pictures of the connected wires bellow the layout.







The Voice Schema used in this project can be downloaded from http://www.justbuss.xpg.com.br/BitVoicerTest.zip (you need to have BitVoicer installed in order to open it).
Back to top
View user's profile Send private message

Display posts from previous:   
Post new topic   Reply to topic    Hacked Gadgets Forum Index -> Microcontroller Resources All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Powered by phpBB © 2001, 2005 phpBB Group