seesoe Newbie
Joined: 22 Apr 2007 Posts: 3 Location: gainesville
|
Posted: Sat May 07, 2011 10:33 pm Post subject: PIC Schematic verification |
|
|
hello, im a noob when it comes to the details of circuits. the project derived from this site, i need help verifying that everything is correct before i build it, if someone can please help that would be great!
http://img40.imageshack.us/img40/3632/rfrx12vmain1.jpg
- there will be 6 rf transmitters with 3 bottoms on them, each button controls one of the 18 solenoid valves.
- 3 temp sensors, connected to the adc pins of the ic, when the ic (in program) sees the temp of the sensor drop below the programmed temp, a corresponding led will turn on.
- the solenoids are about 450 (maybe 500) ma @ 12vdc
any questions comments concerns are greatly appreciated!
thank you!
seesoe[/img] |
|